Sofa cantilevered frame

This model of furniture cover for outdoor sofas has armrests on both sides with the same height all around. Not sure if you have chosen the right model for your outdoor sofa? The front length should be longer than the rear length. Order the perfect furniture cover for your sofa today.

1

Measure your outdoor furniture

Important! Always measure your own furniture. The manufacturer's measurements are rarely adapted to Dryboy's needs.
If the height at the back and front differs, please contact us via info@dryboy.se

  • Fold down and/or place the cushions as you want them under the cover before you start measuring.
  • Only measure the actual dimensions of the furniture. We add the centimeters that make the cover easy to put on and take off.
  • Please take photos to avoid misunderstandings.
  • Keep cushions and pillows folded down on the sofa to help with rainwater runoff.

Need help or advice?

Get in touch with us and we will help you.
cm
?
Measure the total length of the furniture at the back.
Vänligen fyll i ett mått mellan 100 - 570 cm
cm
?
Measure the total length of the furniture at the front between the armrests.
Vänligen fyll i ett mått mellan 100 - 600 cm
cm
?
Measure the total depth of the furniture.
Vänligen fyll i ett mått mellan 50 - 125 cm
cm
?
Measure from the floor up to the backrest. If the height differs after you have placed the cushions and pillows as you want them, choose the highest measurement.
Vänligen fyll i ett mått mellan 50 - 140 cm
Basket of goods

The price is calculated when you fill in your measurements.

Select the country of delivery: Sweden

Description

Measure only the actual dimensions of the furniture
We add the centimeters in length and depth that make the cover easy to put on and take off. For most models, we deduct a few centimeters from the height of the cover to facilitate good ventilation. If you have any doubts when measuring, please contact us and we will help you.

Adjusting the height of the cover
The furniture has its actual dimensions, but you can choose the height of the cover. Place cushions and pillows as you want them under the cover. Measure the height from the floor to the highest point. If the pile of cushions and pillows protrudes more than 20 cm above the backrest, you can choose to increase the height measurement slightly. Keep in mind, however, that it is usually only good if there is a hill sticking up - it makes it easier for water to run off.

A picture is everything
We like to remind you of the value of taking photos and attaching them to your order. It helps us to understand what your furniture looks like and thus do what we do best, customized covers.

Heavy duty elastic.
Each Dryboy cover comes with a sewn-in marine elastic at the bottom. You tighten this securely the first time you put the cover on and lock it with an associated FixLock (strong cord lock). You do not normally need to loosen this in the future.
If you have an extra long piece of furniture, there may be two FixLocks to make it easier to tighten the elastic.

Storm proof
To further secure the cover, we always add Dryboy Storm Straps. These are fitted with a carabiner at each end that you simply attach to the loops sewn into all our covers.
Click in - thread under the furniture - click in. Done!
Some furniture models, such as corner sofas or dining groups, may have extra Velcro straps that are adapted to fit around furniture legs.

Do you have sharp edges?
Then we recommend putting something soft between the edge and the cover when it is left on for a long time to avoid abrasion and damage to the fabric.